Width
We recommend adding 4in to your doorway opening to calculate your door width. This allows for a 2in overlap of the door on each side of the opening.
Height
We recommend adding 1/2in to the doorway opening to calculate your door height. This will result in the top of the door overlapping the doorway opening by 1in when installed, since the door has a 1/2in floor clearance.
CityLights glass is a unique glass design consisting of 5/8" x 5/8" squares that provide a beautiful metallic, prism-like light scattering effect. The CityLights design layer is placed between two pieces of 1/8"thk saftey glass, one clear and one frosted (acid etched) to provide privacy, but also to allow light flow.
Our doors were designed for an easy and intuitive operation. These cast iron handles compliment the architecture of this door by maintaining the minimalist, clean aesthetic they present. Offered in both a straight square or offset design, these handles are 3/4in thick and protrude 2-1/2in from the door face.
13in Square Pull
13in Offset Pull
This 13in flat pull can be placed on the rear of the door to aid in operation. With it’s low profile, it allows the door to fully slide past the opposing jamb without any interference. Sheet metal, powder coated to match the door frame.
Whether opening or closing your door, enjoy a spring-dampened stop from our soft open/close mechanisms. Two soft operating mechanisms are included for each end of the track. When this feature is ordered, the top of the door is machined in multiple locations, ensuring multiple positioning options so the door can be stopped in exactly the desired location.
Check out our short installation video for this feature below.
All resources including spec sheets, dwg's, detailed dimensions, installation instructions and videos necessary to easily specify and support your clients and crew
