Doors are sized by the factory to fit perfectly to the given width and height dimensions. Simply measure the Width (W) and Height (H) of the space the room divider will be installed. Take measurements in different areas to make sure space is square. If not, contact us with dimensions to make sure they fall within the built-in dimensional tolerances of the room divider.
Choose from our standard clear or frosted (acid etched) glass, 1/4" thk. Tempered for safety and strength.
Clear Glass
Frosted Glass
*Crystal Clear Low-Iron (Starphire) glass, tinted glass and other types available by request.
An optional steel kickplate can be added to these doors. While the kickplate adds a decorative touch, it also provides protection to the bottom of the glass and helps with maintenance, especially in high-traffic areas. The steel kickplate is on both the front and the rear side of each door.
Our doors were designed for an easy and intuitive operation. These cast iron handles compliment the architecture of these doors by maintaining the minimalist, clean aesthetic they present. Offered in both a straight square or offset design, these handles are 3/4in thick and protrude 2-1/2in from the door face.
13in Square Pull
13in Offset Pull
We recommend our 13in inset pull, which allows the sliding door to fully slide past the stationary door without any interference. Alternatively, choose our 13in square or 13in offset cast iron handles to match handles on front of the doors (door will not slide fully open as there will be some interference with the stationary door.)
13in Inset Pull
When closing your door, enjoy a spring-dampened stop from our soft close mechanism. One soft close mechanism is included for the sliding door, ensuring a soft, quiet close.
Check out our installation video below for more details on this feature.
All resources including spec sheets, dwg's, detailed dimensions, installation instructions and videos necessary to easily specify and support your clients and crew
Select a row below to filter reviews.
5.0
