Width
We recommend a 2in door overlap on each side of the doorway opening. To calculate this, divide your opening width by 2 and add 2in to get the size of each door.
Height
We recommend adding 1/2in to the doorway opening to calculate your door height. This will result in the top of the door overlapping the doorway opening by 1in when installed, since the door has a 1/2in floor clearance.
Choose from our standard clear or frosted (acid etched) glass, 1/4" thk. Tempered for safety and strength.
Clear Glass
Frosted Glass
*Crystal Clear Low-Iron (Starphire) glass, tinted glass and other types available by request.
An optional steel kickplate can be added to this door. While the kickplate adds a decorative touch, it also provides protection to the bottom of the glass and helps with maintenance, especially in high-traffic areas. The steel kickplate is on both the front and the rear side of the door
Our doors were designed for an easy and intuitive operation. These cast iron handles compliment the architecture of this door by maintaining the minimalist, clean aesthetic they present. Offered in both a straight square or offset design, these handles are 3/4in thick and protrude 2-1/2in from the door face.
13in Square Pull
13in Offset Pull
We recommend our 13in flat pull, which allows each door to fully slide past the jamb without any interference. Alternatively, choose our 13in square or 13in offset cast iron handles to match handles on front of the doors.
13in Flat Pull
Whether opening or closing your door, enjoy a spring-dampened stop from our soft open/close mechanisms. Two soft operating mechanisms are included for each end of the track. When this feature is ordered, the top of the door is machined in multiple locations, ensuring multiple positioning options so the door can be stopped in exactly the desired location.
Check out our short installation video for this feature below.
All resources including spec sheets, dwg's, detailed dimensions, installation instructions and videos necessary to easily specify and support your clients and crew
